For outdoor applications that require a directional wide spread antenna this is a good choice. This antenna has a beam width of 120 degrees at 15 degrees elevation. As with the 10dBi omni, we have deployed hundreds of these devices and the quality is excellent. Take your time to install these correctly and they will give you years of good service.
The antenna comes with a comprehensive galvanised bracket that allows you to mount it to a pole of up to 5cm and direct it exactly where you need coverage. When aligning the antenna us a laser pen to see where you are pointing it, as when you are up a ladder looking down its hard to judge the angle you are installing it at!
We recommend using HDF/LMR400 cable. Don’t go for the 200 grade cable. 400 cables are a swine to make, so if you need some, just give us a call on 0845 838 5340 and we can make the cable up to your exact specification.
Manufacturer’s Description
They don’t say much but here it is... The 24 12015V is a base station point to point antenna designed for use in high density RF environments. The excellent radiation characteristics are the distinguishing features of these antennas.
Technical Specification
Electrical Specification: Gain 12dBi
Bandwidth: 2.4-2.485GHz
VSWR: 1 : 1.8
Polarization: Vertical
Power Rating: 50W
3dB Beam Pattern: 120 degrees x 15 degrees
Cross Pol. Discrimination: 22dB min
Impedance: 50 ohms
Length: 44cm
Width: 22.5cm
Depth: 7.5cm
Weight: 1.03Kg
Windage(at 215km/h): 28 Kg
Mounting Pipe: 5 cm pipe
Radiating Elements: Beam forming PCB Patch Array
Termination: Fixed N- female
Radome: ABS White
Clamps: HDG steel + Zinc plated Bolts
